Benprise Blog

by joviey 1.You can control your iPod players any time and any place,It is equal to iPod’s function keys,
no need to select menu by your iPod,and the function is play, pause, next song, previous song,
volume”+”or “-” , fast forward, fast rewind, power on or power off,select and etc.
2.High fidelity and full frequency,stereo,digital PLL
3.Blue backlight LCD display
4.200 selectable channels,full 88.1 to 107.9 Tuning Range
5.With car charger,and it can charge to iPod,iPhone,iPhone 3G
6.Small electric current, power supply by iPod,iPhone,iPhone 3G,no need extra power supply
7.With remote control,remote for easy control
8.FM Transmitter with Remote Control&Car Charger for iPod&iPhone 3G&iPhone compatible for:all iPod
models & iPod new nano (G3) & iPod classic & iPhone&Touch&iPhone 3G

by joviey

by joviey  Bluetooth function:Bluetooth wireless music transmitter, handsfree car kit for dialing and conversation.
 Support voice dialing (mobile phone must has this function)
 Transmission through the vehicles speakers.
 When incoming a call,the device can reporting number.
 Full frequency:87.5-108MHz.
 LCD display:As the player vary, the lighting color vary. And to display corresponding sign at the same time. eg: when you used IPOD,the light will be blue and display the sign as ipod. And MP3,will be yellow.
 There are 3 connector of the device .
1. USB connection: 1>Can charger for ipod.iphone,iphone3G,nano,itouch,mp3,mp4,cell phone and so on. 2>Read USB flash disk, support kinds of music document format, such as wma,mp3 and so on.
2. 3.5mm audio wire
3. mini connector: power supply connector.
4. the body of the product can rotate 360 degree.
5 the cigar lighter and cupule can replaced freely
6 with adust angle function
7 read the u disk
 Super powerful remote control
1. Functions power ON/OFF, Frequency UP/DOWN, PREV/NEXT tune, Mute sound, volume UP/DOWN. And supported for full ipod functions
2. Dialing call: press on 0-9 keys launching a call.
3. Tune choose: directly orient tune according to their serial number,If you know the serial number of the tune that you want to choose.
e.g the 1234th one, you can use the keyboard on the control to orient directly. At this time, only to enter 1,2,3,4, then press OK, player will run to the oriented 1234th tune, and start to play.
4.Choose EQ mode: Their 9 EQ mode: such as NORMAL, ROCK, SOFT, JAZZ, SRS and so on.Press EQ button , you can change to each mode according above frequency

by joviey 1.FM frequency:87.5-108MHZ,LCD display back-lighting
2.iPod iPhone charger: charging your iPod iPhone player,or charging other player through USB port
3.3.5mm audio input (for other audio player:MP3/MP4CD/VCD/DVD etc.)
4.iPod iPhone holder
5.Wireless remote control:
FM transmitter:Power on/off ,Frequency adjust
iPodPlayer:Previous/NextSong/AudioVolume/Play/Pause/Power ON/OFF
6.FM transmitter:Audio files are played back from any potable medium through the FM radio in car
To power supported USB devices
You can also charge other USB enabled devices such as mobile phones,and BlueTooth headsets with
your Flexpod.You should use the specialized charging cable that came with your device.You can also
use the supplied USB cable if your device will accept mini USB plug in the USB cable into the USB
port of the Flexpod to begin charging
Technology parameter
Frequency eature：20Hz-20KHz
Separation degree：≥60dB
Working current：38mA+10mA
Signal to Noise：≥60dB
Audio distortion：

by joviey INSTRUCTIONS:
Apply to all ipod and all iphone 3GS ,mp3,mp4 and touch nano so on any player.
1.Turn on your car radio and tune to an unused FM station.
2.Place your ipod/iphone into the Flexpod dock by pressing the cradle Lock Release button
3.Now secure your ipod/iphone into place by adjusting the Cradle Wings
4.Connect your ipod/iphone to the Flexpod dock with the supplied ipod connector
5.Plug the Flexpod into car lighter ,the LCD display will turn on
6.Adjust angle of the Flexpod suing knob in back of the dock and the flexible neck
7.Use the up/down frequency selector,to the right of the LCD screen, on the Flexpod to match the frequency of the unused FM station on radio that you have choosen.
8.You can also use the Quick Scan(QS)button to quickly scan frequencies
9.Please note:use the manual station changer on your radio, not the radio’s scan feature. Scanning will bring you to the next broadcast station. You want an unused station
10.TO release your ipod/iphone press the Cradle Lock Release button
To power supported USB devices
You can also charge other USB enabled devices such as mobile phones,and BlueTooth headsets with your Flexpod.You should use the specialized charging cable that came with your device.You can also use the supplied USB cable if your device will accept mini USB Plug in the USB cable into the USB port of the Flexpod to begin charging
3G iphone/iphone Hands Free function:
If you want to use this function while you are listening to music:
1.After connecting your 3G iphone/iphone to the Flexpod with the supplied ipod connector also connect the supplied mini-jack from the Flexpod’s hand’s free port to your device’s headset outlet
2.When you receive a call,just press the “Answer” button on the iphone touch screen,the music will pause and you will hear the conversation through your car speakers.
3.Your voice will be picked up via the microphone built into your iphone
4.After ending the call ,the music will automatically resume
5.You can make outgoing calls by dialing the phone number and pressing the Talk button on your phone. The music will pause and you will hear the conversation through your car speakers
6.To release your ipod/iphone press the wing release button
Technology parameter：
Frequency feature：20Hz-20KHz
Separation degree：≥60dB
Working current：38mA+10mA
Signal to Noise：≥60dB
Audio distortion：

by lyn garcia

by lyn garcia

by lyn garcia